IMG Decathlon

We had a surprise Decathlon very early in 2021. The past three decathlons have all been in Florida and very close to one another only a month or two apart. This has really allowed me to get comfortable with doing all ten events which has allowed me to improve my score. This last decathlon was […]

Ponte Vedra Decathlon

This last decathlon was at Ponte Vedra Highschool once again up in North Florida. This was by far the best Decathlon I have competed in and it shows in my score. It was a cool 70 degrees for both days and extremely low humidity. I was also very fortunate not to encounter any shin pain […]

Scissor Lift Design

We are currently working on developing a 12ft scissor lift design using GoBilda for use on a warehouse automation robot we are working on. The scissor lift is capable of 12ft at full extension and uses consists of 4 stages of 43.5in cross members to achieve this. We started yesterday and this is what we […]

Bolles 2020 Decathlon

This year COVID-19 made it really hard to get to any track meets. The only place I typically get to do Decathlon is at the AAU regional and national meet which were both cancelled this year. Luckily I found a meet and even better it was in Florida! It was at Bolles high school which […]

DIY Guard Gate

So we’ve had this project we’ve always wanted to do for about five years now but never had enough time to do being busy with robotics and the like. That project is a guard gate for our house. We have looked into getting one proffesionally installed but it would have costs thousands and with all […]

Brooklyn Firmware V2 Complete

I took a little break from working on the Brooklyn Board mainly just because I am pretty busy. We decided to start a company called LearningPath that will encompass a bunch of other companies focused on everything ranging from warehouse and logistics to cleaning bathrooms and I am lead project engineer for each of these. […]

1Gb Internet Upgrade

In working on the Unifi internet project we ran into some NAT loopback problems when testing with our current Xfinity gateway router. I realized in order for me to test properly I need to be able to change and mess with the cable modem but didn’t want our entire internet connection to break. To do […]

Unifi Enterprise Wifi – Setting up a Social Login

I have been working on this Unifi Wifi setup nonstop for the past three days now and have made a lot of really good progress. As discussed In order for this to work we need different wifi networks one for the public, students, and security. In order to make this happen, we can create different […]

Unifi Enterprise Wifi

As discussed in my last post we are currently working on a project o bring wifi into title one neighborhoods in order to allow them to do school work from home. We are using the Ubiquiti Unifi Enterprise Wifi access points. These are basically just wifi access points that can also form a mesh network […]

Title One Wifi

The coronavirus pandemic has hit the US extremely hard with quarantine and school closings now lasting months on end. A few of my friends and I were pretty excited when then announced schools closing I mean we could do everything from home we didn’t have to go anywhere until we realized we couldn’t see each […]